Washing machine wanders when spinning - tips and tricks:

Just put the laundry in the washing machine, and then a cozy TV evening. But what is it? Suddenly there is a droning noise from the washroom, the glasses clink in the cupboard, shelf shelves wobble, the neighbors complain by knocking. 

When looking at the washing machine the surprise: the device has crossed half the room. Why the washing machine moves and what you can do about it is revealed by laundry pick up service.
That's why the washing machine is moving:

If during the normal washing process everything is still calm and peaceful, especially the spin cycle makes some washing machines go hiking. The reason lies in an imbalance. Because in the drum, the laundry is hardly even evenly distributed. Instead, the heavy bedding knocks down, a load of socks on top of the drum.

When spinning, 800 revolutions and more per minute should push the water out of the wash. Due to the centrifugal forces then press the heavier laundry more strongly to the drum wall than the other parts. 

Or you only wash a single piece of laundry, for example, a wool sweater, which should be specially spared. It sucks with water and achieves a high weight, while the rest of the drum remains free. In both cases, the drum gets out of its steady swing and starts to jerk. The machine takes over the movement and moves forward millimeter by millimeter.

Modern devices have often incorporated an imbalance control, which detects uneven pressing against the drum wall and possibly reduce the spin number. But when the machine hurls untroubled at full speed and starts moving loudly, a few simple steps help to put an end to the hike.

Step 1: Check the transport lock:
If a washing machine is newly delivered, the transport safety devices must first be removed. With these devices, the moving parts of the device, such as the drum, fixed so that they do not wobble during transport. 

Step 2: Set the machine exactly straight:
Make sure the washing machine is "in the water". This is what the technicians call when something is aligned exactly horizontally or vertically. The term comes from the spirit level, and that's exactly what you should pick up in the second step to track down your washing machine's migration. 

Step 3: Balance uneven floors:
 According to laundry pick up service, the fact that the washing machine migrates can also be due to the "wrong" floor. If it is too hard, such as tiles or parquet, or too soft as cork, the jerking of the washing machine is even more restless and it is easier to move. But above all, if the floor has bumps, for example, in an uneven screed floor, the device quickly loses its balance.