How to eliminate bad smell from washing machine inside?

Now, if the washing machine is already in a very dirty state and there is a bad smell, there is a solution suggested by laundry pickup and delivery. 

First step:

- First, you have to perform a cleaning mixture

- To do this you can pour a glass of vinegar in a cup of water

- Depending on the seriousness of the matter, the mix may be more or less strong.

- This is at your discretion.

Second step:

- Now you must moisten a cloth in this cleaning mixture

- You could also use a sponge

- Depending on the manufacturing materials you must choose a suitable cloth

- Anyway, we recommend that you not be abrasive

- That way you will avoid causing damage and scratches to the surface.

Third step:

- Now you must completely clean the softener and detergent compartments

- Once you're done, you should introduce the lemon juice in a spray bottle

- Then you must spray the entire inner area of ​​the drum.

Fourth step:

- Now it's time to mix another glass of vinegar with three tablespoons of baking soda

- You must pour them into the detergent compartment

- Make a wash as short as possible

- Do not use a centrifuge

- That way all the ducts will be completely clean and you will eliminate the bad smell.

Additional information:

The water in the area may contain lime, which can also be a big problem for the washing machine. For that reason, it is appropriate that a short wash is performed from time to time. For this case, we recommend pouring pure vinegar in the detergent compartment.

Another point laundry pickup and delivery want to emphasize are that you will not confuse the compartments when pouring the cleaner. 

Remember that it is in the detergent, not in the softener, you will not forget. Otherwise, the work of how to clean the washing machine inside will not succeed.

How to clean the washing machine inside: the rubber?

At the time of how to clean the washing machine inside you cannot forget the rubber. This is one of the areas where more dirt accumulates and also the bad smell. So pay attention to all the steps we are going to take to achieve this important goal.

The steps to follow:

Make a cleaning mixture using bleach water and put it in a spray bottle

Pull the rubber with your hands to remove as much as possible

Apply the cleaning solution and use a cloth to scrub the entire surface

On the other hand, if there is mold accumulated in the area, let the solution stand for several minutes

That way you will get rid of the accumulated dirt

After this, use the cloth to scrub with a stronger intensity

Spray water on the rubber and then dry with a cloth

Leave the door open for ventilation and no bad smell builds up.