When
the heat hits, the pool becomes one of our favorite spaces, both for those
looking to have a fun time and for those who find a good moment to relax.
But
it doesn't take care of herself. There are various maintenance activities for
swimming pools that must be carried out so that the water is crystal clear and
respectful of the skin, not only for an aesthetic matter and to make the
bathroom as pleasant as possible, but also for a health issue. So if you want
to maintain a Hayward Ecostar pump,
this guide will be helpful.
Detect when the pool pump is failing:
There
are aspects that must be taken into account weekly during the bathing season to
ensure the good maintenance of the purifier, basic to clean the impurities from
the water and that we bathe safely.
Special
attention should be paid to the variable speed pump which
circulates the water so that it passes through the filter and returns to the
pool and the cleaning of the pool filter which retains the remains of dirt and
impurities.
The Pentair variable speed pump will
play an important role in ensuring that the water is renewed and purified, so
we cannot worry.
During
the bathing season, the Pentair Superflo
pump
must be kept running every day to purify and renew the water.
If
there is a problem with the pool cleaning pump, it must be solved urgently.
Below, we explain some of the problems that may occur more frequently:
If
the pump does not suck: it may be due to the poor condition of a component or
to the breakage or fissure of a pipe.
If
the pump does not drive as it should: the cause may be in an impeller fissure,
or in a jam in the skimmers or in the pump pre-filter.
When
the pump is turned off or directly, it does not start: In the first case, it
may be due to an electrical failure and in the second, to overheating due to a
jam or due to being located in an area that is too sunny and without any
cooling.
If
air enters the pool pump: it may be because the mechanical seal is damaged.
If
the motor crashes and makes loud noises: in these cases, the cause may be the
ingress of water. It is important not to try to start the engine and call a
specialist.
No comments:
Post a Comment